Arm Track Bug

935 views
0
0 Comments

Hello!

I have a MPK249 and I’m mapping a button called Switch (below the faders) to the Arm Buttons.
It’s on the Common Channel (16) and it’s sending CC’s from 32 for CH1, 33 for CH2, 34 for CH3, etc..
All Switches is configured to Toggle Mode and at the APP all with the same config: MODE 1, Specific and each with one specific track from 1-7.

The wrong behavior is that CH1 is the only one working well. Press Down = Arm On. Press Again = Arm Off. All other Switches dedicated for other channels I need to Press Twice for Arm On/Off.
Theres a LOG I made for deep understanding.

MPK249, s: Porta 4, c: 16, Control message: 32, 0 . [ Arm On ]
MPK249, s: Porta 4, c: 16, Control message: 32, 127[ Arm keeps On]
MPK249, s: Porta 4, c: 16, Control message: 32, 0 [ Arm Off ]
MPK249, s: Porta 4, c: 16, Control message: 32, 127[ Arm keeps Off ]

What should it be?! Can I have a support for this (first of my list) issue?

thx
RD

admin Changed status to publish
Attached Files:

1 Answer

0
admin 0 Comments

Hi RD,

For each of the problem toggle mappings inside Remotify, have you set their “momentary” values to “no”? this should ensure that they behave like toggles.

I’ll take a look at your json file asap and let you know if I see anything.

Thanks

John

admin Changed status to publish
Attached Files:

Categories