LED feedback to QuNeo
Hi, I just purchased Remotify Pro for mapping a QuNeo controller to Ableton
However, it doesn’t work to receive LED feedback to the QuNeo. For example, I have set up a session box that works, and so does triggering clips, etc. But there is no LED feedback, despite being specified in the mapping. I believe the mapping is correctly setup, with MIDI prefs, etc.
The issue is probably that remote LED control on QuNeo is preset for specific MIDI data input (in order to remotely create “light shows” on the controller). Unfortunately this cannot be changed via the QuNeo editor, only via a control script. Here’s an example of a script for QuNeo that accomplishes LED feedback for clip control (although I don’t want to use that script, for various reasons): https://www.keithmcmillen.com/projects/quneo-ableton-live-control/
Is there someway that this can be solved with Remotify? Or have I missed something?
Without being able to receive LED feedback to QuNeo I will unfortunately not have any use for Remotify.
Best,
Klas
Hi Klas,
First thing:
In your link/midi tab of midi preferences (inside Ableton),
Make sure your controller selected in the input and output next to your selectedscript.
Also, ensure that Track & Remote are turned on for the both input and output of your QuNeo.
Feedback should work ok for the QuNeo as another user sent over the feedback color values for it.
You can see them in this forum topic https://remotify.io/community/question/led-feedback-values.
Hi Klas,
I’ve had a read through the QuNeo user manual
https://files.keithmcmillen.com/downloads/quneo/QuNeo_FullManual_1.1.pdf
And also downloaded the ableton script from keith mcmillen.
I haven’t seen any indication from either of them that LED feedback needs to be set differently to the midi values of the control itself.
One question, does the script you created through remotify work? as in, the controls on the QuNeo fire the clips in the session box?
John
Hi Klas,
Thanks for quoting the manual, I had another look and on page 38 titled “Midi Input” it says:
“use Channel 1 as the default LED channel for Pads in drum mode and all other sensor types”.
I have an idea which may or may not work. Try creating a copy of your script but set all of the channels in your script to 1. Then assign the 2 versions to your controller in Ableton at the same time.
In theory, this will give you the correct controls in one script and the correct leds for those controls in the other.
I’ve attached your script with the session box pads set to channel 1.
John
To update LED feedback for the session box, you can switch modes (Remotify modes), if I remember right this re-initialises the session box and therefore all of the LEDs for it too.
I’m a little confused by what you mean here:
“I tried using the same MIDI output values as the preset MIDI Input values, and now the LED feedback works”
With Remotify, you can only send LED information to the same midi values as the MIDI input values on the controller.
Unless I misunderstand what you’re saying?
John
Sign up
User registration is currently not allowed.