LED Feedback Values

4.59K views
0

Each midi controller uses specific velocity values in order to display a specific colour on LED enabled inputs such as Pads.
In order for you to quickly and easily get the right feedback for your controller, we’re beginning to build a comprehensive list for different controllers here.
Leave comments below to add & request values for controllers not listed.

LED feedback options are available for all button mapping types.
In most cases you can add a custom ‘on’ and ‘off’ colour to it.
You may find that some mapping types, have more/different options. (A/B Track assign has 3 options, 1. when track is assigned to A, 2. when track is assigned to B, 3. when track is not assigned to any).

Also, session boxes have their own set of LED options for when clips are in a variety of different states.
Read this ‘LED feedback for session boxes’ article for details:
http://remotify.io/docs/tutorials/custom-led-feedback-your-session-box

NI Traktor F1 (controller must be in “indexed” mode)

REDOFF = 4
RED = 6
ORANGEOFF = 8
ORANGE = 10
LORANGEOFF = 12
LORANGE = 14
WYELLOFF = 16
WYELL = 18
YELLOWOFF = 20
YELLOW = 22
LIMEOFF = 24
LIME = 26
GREENOFF = 28
GREEN = 30
MINTOFF = 32
MINT = 34
CYANOFF = 36
CYAN = 38
TURQOFF = 40
TURQ = 42
BLUEOFF = 44
BLUE = 46
PLUMOFF = 48
PLUM = 50
VIOLETOFF = 52
VIOLET = 54
PURPLEOFF = 56
PURPLE = 58
PINK = 60
PINK = 62
FUCHSOFF = 64
FUCHS = 66
WHITEOFF = 76
WHITE = 127

APC Mini

Off = 00
Green = 01
Green Blink = 02
Red = 03
Red Blink = 04
Yellow = 05
Yellow Blink = 06
For the single color buttons the values are,,
Off = 00
On = 01
Blink = 02

Launchpad & Launchpad S

LED_OFF = 4
RED_FULL = 7
RED_HALF = 6
RED_THIRD = 5
GREEN_FULL = 52
GREEN_HALF = 36
GREEN_THIRD = 20
AMBER_FULL = 55
AMBER_HALF = 38
AMBER_THIRD = 21

Launch Control

LED_OFF = 4
RED_FULL = 7
RED_HALF = 6
RED_THIRD = 5
GREEN_FULL = 52
GREEN_HALF = 36
GREEN_THIRD = 20
YELLOW_FULL = 62
AMBER_FULL = 54
AMBER_HALF = 38
AMBER_THIRD = 21

Launch key

RED_FULL = 15
RED_BLINK = 11
GREEN_FULL = 60
GREEN_BLINK = 56
AMBER_FULL = 63
AMBER_HALF = 29
AMBER_BLINK = 59

Novation Impulse & Impulse 2

LED_OFF = 4
RED_FULL = 7
GREEN_FULL = 52
AMBER_FULL = 55

QuNeo

RED_HI = 127
RED_LO = 110
GREEN_HI = 40
GREEN_LO = 10
ORANGE_HI = 80
ORANGE_LO = 60

Hercules P32 DJ

LED_OFF = 0
RED_FULL = 125
RED_HALF = 21
RED_LOW = 11
BLUE_FULL = 126
BLUE_HALF = 61
BLUE_LOW = 41
PURPLE_FULL = 127
PURPLE_HALF = 101
PURPLE_LOW = 81

Livid OhmRGB/Slim
0=off
1-3=white
4-7=cyan
8-15=magenta
16-31=red
32-63=blue
64-126=yellow
127=green

admin Changed status to publish
Attached Files:
0

Hi John,
You mention that leaving the value blank will use the default. I assumed you meant that it would remain the colour it was before, but I think I may be missunderstanding as my APC mini buttons all go green if I leave the value blank.
Any idea for an APC mini.
Cheers

Andy

admin Changed status to publish
Attached Files:
0

Hi Andy,

By “use the default” I mean that the midi controller will revert to the colour it would usually display if nothing had been set at all.
Sorry for the confusion.

I’ll see if I can find some values for the APC mini and post them up here.

Thanks

John

admin Changed status to publish
Attached Files:
0

How not sure so many guys owns this controller, but can be useful :

Hercules P32 DJ

LED_OFF = 0
RED_FULL = 125
RED_HALF = 21
RED_LOW = 11
BLUE_FULL = 126
BLUE_HALF = 61
BLUE_LOW = 41
PURPLE_FULL = 127
PURPLE_HALF = 101
PURPLE_LOW = 81

admin Changed status to publish
Attached Files:
0

Brilliant, thanks Nicolas
I’ll add these to the list!

Regards

John

admin Changed status to publish
Attached Files:
0

Hi John,
Thanks for your answer from the 04/22/17.
Sorry I`ve not got back to you sooner. Thanks for answering both my questions and I`m hoping I find time to explore this further on the weekend.
Regards

Andy

admin Changed status to publish
Attached Files: