LED Feedback Values

5.21K views
0

Each midi controller uses specific velocity values in order to display a specific colour on LED enabled inputs such as Pads.
In order for you to quickly and easily get the right feedback for your controller, we’re beginning to build a comprehensive list for different controllers here.
Leave comments below to add & request values for controllers not listed.

LED feedback options are available for all button mapping types.
In most cases you can add a custom ‘on’ and ‘off’ colour to it.
You may find that some mapping types, have more/different options. (A/B Track assign has 3 options, 1. when track is assigned to A, 2. when track is assigned to B, 3. when track is not assigned to any).

Also, session boxes have their own set of LED options for when clips are in a variety of different states.
Read this ‘LED feedback for session boxes’ article for details:
http://remotify.io/docs/tutorials/custom-led-feedback-your-session-box

NI Traktor F1 (controller must be in “indexed” mode)

REDOFF = 4
RED = 6
ORANGEOFF = 8
ORANGE = 10
LORANGEOFF = 12
LORANGE = 14
WYELLOFF = 16
WYELL = 18
YELLOWOFF = 20
YELLOW = 22
LIMEOFF = 24
LIME = 26
GREENOFF = 28
GREEN = 30
MINTOFF = 32
MINT = 34
CYANOFF = 36
CYAN = 38
TURQOFF = 40
TURQ = 42
BLUEOFF = 44
BLUE = 46
PLUMOFF = 48
PLUM = 50
VIOLETOFF = 52
VIOLET = 54
PURPLEOFF = 56
PURPLE = 58
PINK = 60
PINK = 62
FUCHSOFF = 64
FUCHS = 66
WHITEOFF = 76
WHITE = 127

APC Mini

Off = 00
Green = 01
Green Blink = 02
Red = 03
Red Blink = 04
Yellow = 05
Yellow Blink = 06
For the single color buttons the values are,,
Off = 00
On = 01
Blink = 02

Launchpad & Launchpad S

LED_OFF = 4
RED_FULL = 7
RED_HALF = 6
RED_THIRD = 5
GREEN_FULL = 52
GREEN_HALF = 36
GREEN_THIRD = 20
AMBER_FULL = 55
AMBER_HALF = 38
AMBER_THIRD = 21

Launch Control

LED_OFF = 4
RED_FULL = 7
RED_HALF = 6
RED_THIRD = 5
GREEN_FULL = 52
GREEN_HALF = 36
GREEN_THIRD = 20
YELLOW_FULL = 62
AMBER_FULL = 54
AMBER_HALF = 38
AMBER_THIRD = 21

Launch key

RED_FULL = 15
RED_BLINK = 11
GREEN_FULL = 60
GREEN_BLINK = 56
AMBER_FULL = 63
AMBER_HALF = 29
AMBER_BLINK = 59

Novation Impulse & Impulse 2

LED_OFF = 4
RED_FULL = 7
GREEN_FULL = 52
AMBER_FULL = 55

QuNeo

RED_HI = 127
RED_LO = 110
GREEN_HI = 40
GREEN_LO = 10
ORANGE_HI = 80
ORANGE_LO = 60

Hercules P32 DJ

LED_OFF = 0
RED_FULL = 125
RED_HALF = 21
RED_LOW = 11
BLUE_FULL = 126
BLUE_HALF = 61
BLUE_LOW = 41
PURPLE_FULL = 127
PURPLE_HALF = 101
PURPLE_LOW = 81

Livid OhmRGB/Slim
0=off
1-3=white
4-7=cyan
8-15=magenta
16-31=red
32-63=blue
64-126=yellow
127=green

admin Changed status to publish
Attached Files:
0

Any values for the AKAI MIDIMIX ? πŸ™‚

admin Changed status to publish
Attached Files:
0

I think the midimix buttons only have one colour.
Maybe “127” for on and “0” for off?

admin Changed status to publish
Attached Files:
0

Yes they should override the colours on the twister.
I don’t have a list for it but if you open the midi fighter utility, I’m pretty sure it gives you the velocity values of each colour in there.

John

admin Changed status to publish
Attached Files:
0

Hey John,

LEDs working fine right now so far, but is it normal for them to not work when assigned to MIDI CH2 ?

Cheers πŸ™‚

admin Changed status to publish
Attached Files:
0

The midi channel needs to be the same as the button you are trying to “light up”.
So if the button is on channel 1 then it will not work on channel 2.

I hope that helps.

John

admin Changed status to publish
Attached Files: