LED Feedback Values
Each midi controller uses specific velocity values in order to display a specific colour on LED enabled inputs such as Pads.
In order for you to quickly and easily get the right feedback for your controller, we’re beginning to build a comprehensive list for different controllers here.
Leave comments below to add & request values for controllers not listed.
LED feedback options are available for all button mapping types.
In most cases you can add a custom ‘on’ and ‘off’ colour to it.
You may find that some mapping types, have more/different options. (A/B Track assign has 3 options, 1. when track is assigned to A, 2. when track is assigned to B, 3. when track is not assigned to any).
Also, session boxes have their own set of LED options for when clips are in a variety of different states.
Read this ‘LED feedback for session boxes’ article for details:
http://remotify.io/docs/tutorials/custom-led-feedback-your-session-box
NI Traktor F1 (controller must be in “indexed” mode)
REDOFF = 4
RED = 6
ORANGEOFF = 8
ORANGE = 10
LORANGEOFF = 12
LORANGE = 14
WYELLOFF = 16
WYELL = 18
YELLOWOFF = 20
YELLOW = 22
LIMEOFF = 24
LIME = 26
GREENOFF = 28
GREEN = 30
MINTOFF = 32
MINT = 34
CYANOFF = 36
CYAN = 38
TURQOFF = 40
TURQ = 42
BLUEOFF = 44
BLUE = 46
PLUMOFF = 48
PLUM = 50
VIOLETOFF = 52
VIOLET = 54
PURPLEOFF = 56
PURPLE = 58
PINK = 60
PINK = 62
FUCHSOFF = 64
FUCHS = 66
WHITEOFF = 76
WHITE = 127
APC Mini
Off = 00
Green = 01
Green Blink = 02
Red = 03
Red Blink = 04
Yellow = 05
Yellow Blink = 06
For the single color buttons the values are,,
Off = 00
On = 01
Blink = 02
Launchpad & Launchpad S
LED_OFF = 4
RED_FULL = 7
RED_HALF = 6
RED_THIRD = 5
GREEN_FULL = 52
GREEN_HALF = 36
GREEN_THIRD = 20
AMBER_FULL = 55
AMBER_HALF = 38
AMBER_THIRD = 21
Launch Control
LED_OFF = 4
RED_FULL = 7
RED_HALF = 6
RED_THIRD = 5
GREEN_FULL = 52
GREEN_HALF = 36
GREEN_THIRD = 20
YELLOW_FULL = 62
AMBER_FULL = 54
AMBER_HALF = 38
AMBER_THIRD = 21
Launch key
RED_FULL = 15
RED_BLINK = 11
GREEN_FULL = 60
GREEN_BLINK = 56
AMBER_FULL = 63
AMBER_HALF = 29
AMBER_BLINK = 59
Novation Impulse & Impulse 2
LED_OFF = 4
RED_FULL = 7
GREEN_FULL = 52
AMBER_FULL = 55
QuNeo
RED_HI = 127
RED_LO = 110
GREEN_HI = 40
GREEN_LO = 10
ORANGE_HI = 80
ORANGE_LO = 60
Hercules P32 DJ
LED_OFF = 0
RED_FULL = 125
RED_HALF = 21
RED_LOW = 11
BLUE_FULL = 126
BLUE_HALF = 61
BLUE_LOW = 41
PURPLE_FULL = 127
PURPLE_HALF = 101
PURPLE_LOW = 81
Livid OhmRGB/Slim
0=off
1-3=white
4-7=cyan
8-15=magenta
16-31=red
32-63=blue
64-126=yellow
127=green
Hi All,
After some hours online i found it for the Behringer X-touch MIni in MC mode, but i think its good for the whole X-touch series as it is based on the Mackie Script.
Button LEDs
Note:
Same as the input note when pressing down the button.
40-45, 84-95
Velocity:
0 = OFF
1 = BLINK
127 = ON
Knob LED RING
CC (Control Change):
48-55
Value:
0 = OFF
1-11 = SINGLE
17-27 = TRIM
33-43 = FAN
49-54 = SPREAD
BTW if you know the configuration to make it work in CSS pls let me know, I tried it following the “Get Value Fron Ranges” tutor on YouTube, with the parameters above but seems like that for some reason the getting value from device parameters are not updated dynamically for some reason. The LED ring lights up but doesn’t change with the value changing,
Sign up
User registration is currently not allowed.